Grasshopper Frog Closure

Best Blog Tips

A pretty closure is the perfect finish for any bag, tote, shawl, wrap or jacket, this one is no exception!

Materials-
Worsted weight yarn of your choice (I used Red Heart Spring Green,) less than 1/2 skein
Crochet hook size H
Green button the size of the loop you plan to leave on the frog (that can be adjusted to your taste)
Pins
Blunt needle
Pinning surface (cardboard, pillow, macrame board, etc)
Measuring tape

If you don't know how to make the ropes, please refer to this tutorial:
How to Make Crochet I-Cord Ropes



To make this frog, proceed as follows:

  • Make a 25" long I-Cord crochet rope. (Measure it, you'll need every inch of it!) Fasten off, leaving long tail to later sew it with.
  • Fold the rope in half, matching ends. Cross left side of rope over right side, pin in place (that is your buttonhole, adjust to size of button you have chosen, remembering to match the ends.)
  • Cut a piece of Spring Green yarn 60" long. Fold it in half. Fold it in half again, remembering to match ends. Move pin on the I-cord to the beginning of one of the sides, add another pin to the other rope leg, making sure you keep the loop you formed, but freeing the spot so you can work. Put one finger into the loop in the middle of the folded yarn and pass it under the loop formed by the I-cord or crocheted rope, then bring the yarn around from the back to the front over the loop, and pass the ends of the yarn through the loop in the yarn and tighten it, securing the I-cord loop in place. (Do NOT cut the yarn!) Move the pins again to where it’s comfortable for you to secure the loop and yet be able to work with the ends freely.
  • Divide the hanging yarn into 2 equal sections.
  • While holding the piece of hanging yarn that lies to the right, bring the end of the crocheted rope over the yarn, then around it towards the back and insert the end of the rope through the loop that forms naturally. Repeat a second time.
  • Do the same with the opposite leg of the I-cord, pass it over the handing yarn on the left, then around it towards the back and through the loop that forms, and tighten it. Repeat a second time.
  • Now bring the handing yarn to the middle and tie a knot.
  • Now pass the crocheted rope on the right under the hanging yarn and bend it, pass the I-cord on the left over the handing yarn and bend it, pass the ends through the loops formed and tighten. Repeat again.
Done!



  Bible Universe
Best Blog Tips

Knotted Frog Closure

Best Blog Tips

My mom asked me to make this frog closure for her, for a pretty wrap she has been crocheting and I decided to share it with all of you. It can be equally used as a closure for a warp, shawl, jacket or a lovely large tote or bag, so here it is!

Materials-
Worsted weight yarn of your choice (I used Red Heart Burgundy)
Crochet hook size h
Measuring tape
Scissors
Pins
Blunt needle
Cardboard, pillow or other pinning surface
Button (color of your choice, size according to the buttonhole loop you create at the beginning)

If you do not know how to make crocheted I-Cord ropes, please refer to this tutorial:
If you don't know how to make the ropes, please refer to this tutorial: How to Make Crochet I-Cord Ropes
To make this frog, proceed as follows:
Make a 25" long I-Cord crochet rope. (Measure it, you'll need every inch of it!) Fasten off, leaving long tail.
Fold rope in half, ends matching. Fold left end of rope over right end, pin to pinning surface (that will be your buttohole, so take into consideration the size you want and slide the hole a little bit if necessary to match your button size! Make sure ends match after adjustment.)
After buttonhole has been made, you will have approx. 10" on either side of rope to work with. Place a pin in the middle of the loop, where you pass the rope over itself to form the loop and 1 pin on each side of the rope, on both sides of the top.
Cut 2 20" pieces of Burgundy (or color that you have chosen to make your frog) and fold in half, matching ends. Remove central pin of buttonhole loop, leaving the other two pins in place.
Slip the folded yarn under the loop that forms the buttonhole, where the rope legs cross, and froming a loop with the yarn, pass the ends of the yarn through the yarn loop and pull tight. Replace the central pin on top of the yarn, leave the rest of the yarn hanging. Fold Left leg of rope over the central hanging yarn and pass it under the right leg of the rope. Bring right leg of the rope under the yarn and over the loop that has formed when you bent the left leg of the rope. Pull up gently, holding the handing yarn taut. (Square Knot formed.)
Move the pins to the top of the buttonhole loop.



Repeat the Square Knot.
Repeat the Square Knot again.
Curl remaining length of rope over itself and pin.
Repeat with the opposite side.
Thread blunt needle with yarn of corresponding color and begin to sew the curled up ends secure.Using side loops of I-Cord rope, sew the curled up ends to the knotted center. Fasten off. weave in ends.
Make a few discreet stitches to secure butthole loop in place for constant use.
DO NOT SNIP THE HANGING YARN. Weave into the back of the frog.
Fasten off, weave in ends.
Tip- If your frog is a bit twisted to the side, that is normal because of the knotting. "Straighten" it out and fix it in place by a few discreet stitches at the back.

Done!



  Bible Universe
Best Blog Tips